# Supported Valves
If you are having trouble with your Bulldog Valve Robot installation, Please email [support@EcoNetControls.com](mailto:support@EcoNetControls.com "mailto:support@EcoNetControls.com"). An Installation Specialist will get back to you promptly and can help with installation, setup and configuration.
The Bulldog mounts over a standard ball valve, no special tools or plumbing work is required. The included mounting kit supports various valve types in sizes ½" inch to 2 inch. (Typical Residential Installations use a ¾" or a 1" valve size)
The Valve size is determined by the plumbing pipe size. (¾" pipe uses a ¾ valve, 1" diameter pipe uses a 1" valve, and so on..)
The valve size is usally printed or stamped on the side of the valve body.
###### ♦ [1/2" Valves](https://www.econetshop.com/pages/supported-valves\#valves-1-2 "\#valves-1-2") ♦ [3/4" Valves](https://www.econetshop.com/pages/supported-valves\#valves-3-4 "\#valves-3-4") ♦ [1" Inch Valves](https://www.econetshop.com/pages/supported-valves\#valves-1 "\#valves-1") ♦ [1.25" Valves](https://www.econetshop.com/pages/supported-valves\#valves-1-25-2 "\#valves-1-25-2") ♦ [1.5" Valves](https://www.econetshop.com/pages/supported-valves\#valves-1-25-2 "\#valves-1-25-2") ♦ [2" Valves](https://www.econetshop.com/pages/supported-valves\#valves-1-25-2 "\#valves-1-25-2")
The table below lists the valve sizes and types that are compatible with the Bulldog Valve Robot:
HC2L Mounting Kit
Support for
½", ¾" and 1" Valves
HC2XL Mounting Kit
Support for
1", 1¼", 1½" Valves
### Compatibility Table:
| Valve Photo | Size/Type | Mounting Bracket |
| --- | --- | --- |
| 1/2" |
| | 1/2" Solder | HC2S
Contact Support
Request Small Mounting Kit
Bulldog installation on 1/2" solder valve - YouTube
Tap to unmute
[Bulldog installation on 1/2" solder valve](https://www.youtube.com/watch?v=oqG8RugnZGo) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1/2" Threaded | HC2L
Bulldog installation on 1/2" threaded ball valve - YouTube
Tap to unmute
[Bulldog installation on 1/2" threaded ball valve](https://www.youtube.com/watch?v=38nggMif1qs) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1/2" SharkBite | HC2L
Bulldog installation on 1/2" Sharkbite type valve, and handle flip option - YouTube
Tap to unmute
[Bulldog installation on 1/2" Sharkbite type valve, and handle flip option](https://www.youtube.com/watch?v=WQGcl2BxEiQ) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1/2" Compression | HC2L
Bulldog installation on 3/4" compression type valve - YouTube
Tap to unmute
[Bulldog installation on 3/4" compression type valve](https://www.youtube.com/watch?v=Bp1nWNvkKEE) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1/2" Crimp, Smooth Ring (Pex B Pipe) | HC2S
Contact Support
Request small mounting kit |
| | 1/2" Crimp, Tab Ring (Pex B Pipe) | HC3PEX0.5
Contact Support for semi-custom brackets |
| | 1/2" Crimp (Pex A Pipe) | HC2L |
| | 1/2" ProPress | HC2S
Contact support for semi-custom brackets |
| 3/4" |
| | 3/4" Solder | HC2L
Bulldog Smart Valve, Installation: 3/4 Inch Solder Valve - YouTube
Tap to unmute
[Bulldog Smart Valve, Installation: 3/4 Inch Solder Valve](https://www.youtube.com/watch?v=DCgHx3BbNrw) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 3/4" Threaded | HC2L
EcoNet's Bulldog Valve Robot install on 3/4" Threaded Ball Valve - YouTube
Tap to unmute
[EcoNet's Bulldog Valve Robot install on 3/4" Threaded Ball Valve](https://www.youtube.com/watch?v=cmLK7EjLxng) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 3/4" SharkBite | HC2L
Bulldog Smart Home Valve Robot on a 3/4" SharkBite - YouTube
Tap to unmute
[Bulldog Smart Home Valve Robot on a 3/4" SharkBite](https://www.youtube.com/watch?v=G2FwBQulbLE) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 3/4" Compression | HC2L
Bulldog installation on 3/4" compression type valve - YouTube
Tap to unmute
[Bulldog installation on 3/4" compression type valve](https://www.youtube.com/watch?v=Bp1nWNvkKEE) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 3/4" Crimp, Smooth Ring (Pex B Pipe) | HC2L
Installing Bulldog on 3/4" Pex Valve - YouTube
Tap to unmute
[Installing Bulldog on 3/4" Pex Valve](https://www.youtube.com/watch?v=9eF2x_BDHr4) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 3/4" Crimp, Tab Ring (Pex B Pipe) | HC3PEX0.75
Contact Support for semi-custom brackets |
| | 3/4" Crimp (Pex A Pipe) | HC2L |
| | 3/4" ProPress | HC2L Propress
Contact support for semi-custom brackets
Bulldog installation on Propress type valve - YouTube
Tap to unmute
[Bulldog installation on Propress type valve](https://www.youtube.com/watch?v=pI1DvizJwDA) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
1" Valve in video, same bracket for 3/4" |
| 1" |
| | 1" Solder | HC2L
Bulldog Valve Robot, no plumbing required, 1 inch solder - YouTube
Tap to unmute
[Bulldog Valve Robot, no plumbing required, 1 inch solder](https://www.youtube.com/watch?v=8K51lMVIIa8) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1" Threaded (Type A) | HC2XL
EcoNet's Bulldog Smart Home Valve Robot; 1 Inch Threaded Ball Valve - YouTube
Tap to unmute
[EcoNet's Bulldog Smart Home Valve Robot; 1 Inch Threaded Ball Valve](https://www.youtube.com/watch?v=D7OhGpGvS8U) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1" Threaded (Type B) | HC2XL
EcoNet's Bulldog Valve Robot: large 1 Inch threaded install - YouTube
Tap to unmute
[EcoNet's Bulldog Valve Robot: large 1 Inch threaded install](https://www.youtube.com/watch?v=8212Wg-h1pI) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1" SharkBite | HC2XL
1 inch sharkbite Smart Home Valve, No Plumbing Required - YouTube
Tap to unmute
[1 inch sharkbite Smart Home Valve, No Plumbing Required](https://www.youtube.com/watch?v=xyF9K_8VdnA) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1" Compression | HC2XL |
| | 1" Crimp, Smooth Ring (Pex B Pipe) | HC2L
Installing Bulldog on 3/4" Pex Valve - YouTube
Tap to unmute
[Installing Bulldog on 3/4" Pex Valve](https://www.youtube.com/watch?v=9eF2x_BDHr4) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
3/4" Valve in video, same bracket for 1" |
| | 1" Crimp, Tab Ring (Pex B Pipe) | HC3PEX1
Contact Support for semi-custom brackets |
| | 1" Crimp (Pex A Pipe) | HC2L |
| | 1" ProPress | HC2L Propress
Bulldog installation/mounting on 1" Propress Valve - YouTube
Tap to unmute
[Bulldog installation/mounting on 1" Propress Valve](https://www.youtube.com/watch?v=EoewCMnoXh0) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| 1-1/4" to 2" |
| | 1-1/4" Solder | HC2XL
Bulldog Smart Home Valve Robot on 1-1/4" solder ball valve - YouTube
Tap to unmute
[Bulldog Smart Home Valve Robot on 1-1/4" solder ball valve](https://www.youtube.com/watch?v=hCviOF3MgSo) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1-1/4" Threaded | HC2XL
EcoNet's Smart Home Bulldog Valve Robot, 1-1/4" NPT Valve - YouTube
Tap to unmute
[EcoNet's Smart Home Bulldog Valve Robot, 1-1/4" NPT Valve](https://www.youtube.com/watch?v=YISPh44rBLM) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1-1/4" Propress | HC2XL Propress
Contact Support for semi-custom brackets |
| | 1-1/2" Solder | HC2XL
Bulldog Valve Robot, no plumbing required, 1-1/2 inch solder - YouTube
Tap to unmute
[Bulldog Valve Robot, no plumbing required, 1-1/2 inch solder](https://www.youtube.com/watch?v=tGPWoqseO00) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 1-1/2" Threaded | HC2XXL
Contact Support
Request "XX" mounting kit
Bulldog Valve Robot installation on 1.5" Threaded Ball Valve - YouTube
Tap to unmute
[Bulldog Valve Robot installation on 1.5" Threaded Ball Valve](https://www.youtube.com/watch?v=Y9-vkQXGjlM) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
| | 2" Solder | HC2XXL
Contact Support
Request "XX" mounting kit |
| | 2" Threaded | HC2XXL
Contact Support
Request "XX" mounting kit
Smart Home Valve Robot, install on an extra large 2 inch valve - YouTube
Tap to unmute
[Smart Home Valve Robot, install on an extra large 2 inch valve](https://www.youtube.com/watch?v=lVjZb1-jfG0) [EcoNet Controls](https://www.youtube.com/channel/UCUwPIDalseKnHV57IVakNSw)
EcoNet Controls1.74K subscribers
|
## Search
Search
Clear
#### Bulldog Matter Solutions
- [Bulldog Matter over WIFI Starter Kit EVC400-MW - Easy Installation, No Plumbing Required, Smart Home Optional](https://www.econetshop.com/products/bulldog-leak-detection-matter-over-wifi-valve-controller)
Bulldog Matter over WIFI Starter Kit EVC400-MW - Easy Installation, No Plumbing Required, Smart Home Optional
$215.00 USD
- [BulldogIQ Matter over WIFI Starter Kit with 3 sensors - Easy Installation, No Plumbing Required, Smart Home Optional](https://www.econetshop.com/products/bulldog-leak-detection-matter-with-3-leak-sensors)
BulldogIQ Matter over WIFI Starter Kit with 3 sensors - Easy Installation, No Plumbing Required, Smart Home Optional
$315.00 USD
- [Bulldog Matter over WIFI Starter Kit with 6 sensors - Easy Installation, No Plumbing Required, Smart Home Optional](https://www.econetshop.com/products/bulldog-matter-over-wifi-starter-kit-with-6-leak-sensors)
Bulldog Matter over WIFI Starter Kit with 6 sensors - Easy Installation, No Plumbing Required, Smart Home Optional
$405.00 USD
- [Bulldog Matter over WIFI Starter Kit with 9 sensors - Easy Installation, No Plumbing Required, Smart Home Optional](https://www.econetshop.com/products/bulldog-matter-over-wifi-starter-kit-with-9-leak-sensors)
Bulldog Matter over WIFI Starter Kit with 9 sensors - Easy Installation, No Plumbing Required, Smart Home Optional
$495.00 USD
View all
www.econetshop.com
# www.econetshop.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR\_BLOCKED\_BY\_CLIENT
Reload
This page has been blocked by an extension
www.econetshop.com
# www.econetshop.com is blocked
This page has been blocked by an extension
- Try disabling your extensions.
ERR\_BLOCKED\_BY\_CLIENT
Reload
This page has been blocked by an extension